
Ignoring:
Escaping:
~The End~







Now that you have your image printed on the freezer paper it's time to cut your image out with the exacto knife. Once your image is cut, trim your freezer paper leaving generous space around the image so you don't get flyaway paint on your shirt but make sure you cut the tape ends off- you do not want to iron the tape- trust me. Set your stencil aside for just a second.
With your iron set to the high or cotton setting (no steam) cut a big chunk of freezer paper about 6" x 6" square or an inch or two bigger than your stencil and iron it to the inside of the shirt, shiny side to the fabric and paper side facing you, in the area where your stencil will be on the front. This keeps the paint from bleeding through to the areas of the shirt you don't want paint to be. Now flip the shirt back right side out.

Now you're ready for the fun part. I wanted a few of my shirts to have the bunny smack in the center so I folded the shirt in half and ironed it to make a crease for the center line to help guide my stencil placement.
Once you find your bunny's "happy place" put the stencil on the shirt, shiny side down and iron with the iron on the cotton or high setting, no steam. It will turn the paper kind of yellow and it should if it's hot enough. Try not to wiggle the iron around to much or it will shift your stencil or tear your paper. Keep the iron on it for about 20 to 30 seconds or until it's set. The stencil should be really stuck and you can check by trying a corner, it shouldn't pull up at all.

Now you get to paint! With your stencil stuck and cool to the touch apply a thin layer of fabric paint with your paint brush. If your brown isn't brown enough you can mix a little black in there until it's the shade you want. I would recommend letting the first coat dry and adding a second coat, but I didn't do that and I should have...

Once the paint is dry you can peel off your freezer paper from the front and from the inside. Viola`, you have your rabbit!

I wanted mine to look a little more girly so I added ribbon bow ties. If you do this just make sure to heat seal or fray check the ribbon ends for the wash.

And because Jeremy needed a shirt to I had to make a boy version using Jeremy's favorite phrase. I did the same technique for everything on Jim's shirt, only I used layers and cut the title... yada yada

So why don't you give it a go... because everyone should have one and it's not as hard as I made it sound, really!
I love Kaci's hair- it looks just like mine did when I was a tiny thing, really short and straight on top and curly in the back. The short on top thing isn't so cute but the curls are fun and it keeps her looking like my little baby for a bit longer. I've been plugging away at my machine sewing the girls' easter dresses when it just hit me. How in the world am I going to fix Kaci's hair for easter? What can you do with a mullet? The picture doesn't show how short the top truly is, about 2" max, because I use so much spray gel and hair spray it just "flows" toward the rubber bands even if it's not in the rubber bands. 
I felt the baby move yesterday for the first time while I was at church! I was just sitting enjoying the peace and quiet (Cody stayed home with the sick girls) and I felt a little lump of pressure very low on my middle right side all of the sudden. I don't like being pushed around so I pushed back- and so did the baby! The more pressure I applied the more it squirmed, so cute. Okay now that I think of it, maybe it's mean to poke a poor defenseless little baby that's trapped and has no where to go, but the things a mother must do for some proof of life...





